Struct Minute 

pub struct Minute<const N: u128 = 1>;

A unit of time representing exactly N minutes.

Implementations

impl Minute<1>

pub const fn per<T>(_larger: T) -> <T as DefaultOutput<Self>>::Output

where T: MultipleOf<Self, T::Output> + DefaultOutput<Self> + Copy,

Obtain the number of times Minute can fit into T. If T is smaller than Minute, the code will fail to compile. The return type is the smallest unsigned integer type that can represent the value.

Valid calls:

• Minute::per(Minute) (returns u8)
• Minute::per(Hour) (returns u8)
• Minute::per(Day) (returns u16)
• Minute::per(Week) (returns u16)

pub const fn per_t<Output>( larger: impl MultipleOf<Self, Output> + Copy, ) -> Output

Obtain the number of times Minute can fit into T. If T is smaller than Minute, the code will fail to compile. The return type is any primitive numeric type that can represent the value.

Valid calls:

• Minute::per(Minute) (returns u8, u16, u32, u64, u128, usize, i8, i16, i32, i64, i128, isize, f32, or f64)
• Minute::per(Hour) (returns u8, u16, u32, u64, u128, usize, i8, i16, i32, i64, i128, isize, f32, or f64)
• Minute::per(Day) (returns u16, u32, u64, u128, usize, i16, i32, i64, i128, isize, f32, or f64)
• Minute::per(Week) (returns u16, u32, u64, u128, usize, i16, i32, i64, i128, isize, f32, or f64)

Trait Implementations

impl<const N: u128> Clone for Minute<N>

fn clone(&self) -> Minute<N>

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<const N: u128> Debug for Minute<N>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl DefaultOutput<Microsecond> for Minute

type Output = u32

The default output type for the per method.

impl DefaultOutput<Millisecond> for Minute

type Output = u16

The default output type for the per method.

impl DefaultOutput<Minute> for Day

type Output = u16

The default output type for the per method.

impl DefaultOutput<Minute> for Hour

type Output = u8

The default output type for the per method.

impl DefaultOutput<Minute> for Minute

type Output = u8

The default output type for the per method.

impl DefaultOutput<Minute> for Week

type Output = u16

The default output type for the per method.

impl DefaultOutput<Nanosecond> for Minute

type Output = u64

The default output type for the per method.

impl DefaultOutput<Second> for Minute

type Output = u8

The default output type for the per method.

impl<const N: u128> Eq for Minute<N>

#[doc(hidden)]

fn assert_receiver_is_total_eq(&self)

impl<const N: u128> Hash for Minute<N>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl MultipleOf<Microsecond, f32> for Minute

const VALUE: f32 = 60_000_000.

The number of one unit of time in the other.

impl MultipleOf<Microsecond, f64> for Minute

const VALUE: f64 = 60_000_000.

The number of one unit of time in the other.

impl MultipleOf<Microsecond, i128> for Minute

const VALUE: i128 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, i32> for Minute

const VALUE: i32 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, i64> for Minute

const VALUE: i64 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, isize> for Minute

const VALUE: isize = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, u128> for Minute

const VALUE: u128 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, u32> for Minute

const VALUE: u32 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, u64> for Minute

const VALUE: u64 = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Microsecond, usize> for Minute

const VALUE: usize = 60_000_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, f32> for Minute

const VALUE: f32 = 60_000.

The number of one unit of time in the other.

impl MultipleOf<Millisecond, f64> for Minute

const VALUE: f64 = 60_000.

The number of one unit of time in the other.

impl MultipleOf<Millisecond, i128> for Minute

const VALUE: i128 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, i32> for Minute

const VALUE: i32 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, i64> for Minute

const VALUE: i64 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, isize> for Minute

const VALUE: isize = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, u128> for Minute

const VALUE: u128 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, u16> for Minute

const VALUE: u16 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, u32> for Minute

const VALUE: u32 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, u64> for Minute

const VALUE: u64 = 60_000

The number of one unit of time in the other.

impl MultipleOf<Millisecond, usize> for Minute

const VALUE: usize = 60_000

The number of one unit of time in the other.

impl MultipleOf<Minute, f32> for Day

const VALUE: f32 = 1_440.

The number of one unit of time in the other.

impl MultipleOf<Minute, f32> for Hour

const VALUE: f32 = 60.

The number of one unit of time in the other.

impl MultipleOf<Minute, f32> for Minute

const VALUE: f32 = 1.

The number of one unit of time in the other.

impl MultipleOf<Minute, f32> for Week

const VALUE: f32 = 10_080.

The number of one unit of time in the other.

impl MultipleOf<Minute, f64> for Day

const VALUE: f64 = 1_440.

The number of one unit of time in the other.

impl MultipleOf<Minute, f64> for Hour

const VALUE: f64 = 60.

The number of one unit of time in the other.

impl MultipleOf<Minute, f64> for Minute

const VALUE: f64 = 1.

The number of one unit of time in the other.

impl MultipleOf<Minute, f64> for Week

const VALUE: f64 = 10_080.

The number of one unit of time in the other.

impl MultipleOf<Minute, i128> for Day

const VALUE: i128 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, i128> for Hour

const VALUE: i128 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, i128> for Minute

const VALUE: i128 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, i128> for Week

const VALUE: i128 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, i16> for Day

const VALUE: i16 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, i16> for Hour

const VALUE: i16 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, i16> for Minute

const VALUE: i16 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, i16> for Week

const VALUE: i16 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, i32> for Day

const VALUE: i32 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, i32> for Hour

const VALUE: i32 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, i32> for Minute

const VALUE: i32 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, i32> for Week

const VALUE: i32 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, i64> for Day

const VALUE: i64 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, i64> for Hour

const VALUE: i64 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, i64> for Minute

const VALUE: i64 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, i64> for Week

const VALUE: i64 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, i8> for Hour

const VALUE: i8 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, i8> for Minute

const VALUE: i8 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, isize> for Day

const VALUE: isize = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, isize> for Hour

const VALUE: isize = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, isize> for Minute

const VALUE: isize = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, isize> for Week

const VALUE: isize = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, u128> for Day

const VALUE: u128 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, u128> for Hour

const VALUE: u128 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, u128> for Minute

const VALUE: u128 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, u128> for Week

const VALUE: u128 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, u16> for Day

const VALUE: u16 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, u16> for Hour

const VALUE: u16 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, u16> for Minute

const VALUE: u16 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, u16> for Week

const VALUE: u16 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, u32> for Day

const VALUE: u32 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, u32> for Hour

const VALUE: u32 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, u32> for Minute

const VALUE: u32 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, u32> for Week

const VALUE: u32 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, u64> for Day

const VALUE: u64 = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, u64> for Hour

const VALUE: u64 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, u64> for Minute

const VALUE: u64 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, u64> for Week

const VALUE: u64 = 10_080

The number of one unit of time in the other.

impl MultipleOf<Minute, u8> for Hour

const VALUE: u8 = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, u8> for Minute

const VALUE: u8 = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, usize> for Day

const VALUE: usize = 1_440

The number of one unit of time in the other.

impl MultipleOf<Minute, usize> for Hour

const VALUE: usize = 60

The number of one unit of time in the other.

impl MultipleOf<Minute, usize> for Minute

const VALUE: usize = 1

The number of one unit of time in the other.

impl MultipleOf<Minute, usize> for Week

const VALUE: usize = 10_080

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, f32> for Minute

const VALUE: f32 = 60_000_000_000.

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, f64> for Minute

const VALUE: f64 = 60_000_000_000.

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, i128> for Minute

const VALUE: i128 = 60_000_000_000

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, i64> for Minute

const VALUE: i64 = 60_000_000_000

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, u128> for Minute

const VALUE: u128 = 60_000_000_000

The number of one unit of time in the other.

impl MultipleOf<Nanosecond, u64> for Minute

const VALUE: u64 = 60_000_000_000

The number of one unit of time in the other.

impl MultipleOf<Second, f32> for Minute

const VALUE: f32 = 60.

The number of one unit of time in the other.

impl MultipleOf<Second, f64> for Minute

const VALUE: f64 = 60.

The number of one unit of time in the other.

impl MultipleOf<Second, i128> for Minute

const VALUE: i128 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, i16> for Minute

const VALUE: i16 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, i32> for Minute

const VALUE: i32 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, i64> for Minute

const VALUE: i64 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, i8> for Minute

const VALUE: i8 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, isize> for Minute

const VALUE: isize = 60

The number of one unit of time in the other.

impl MultipleOf<Second, u128> for Minute

const VALUE: u128 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, u16> for Minute

const VALUE: u16 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, u32> for Minute

const VALUE: u32 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, u64> for Minute

const VALUE: u64 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, u8> for Minute

const VALUE: u8 = 60

The number of one unit of time in the other.

impl MultipleOf<Second, usize> for Minute

const VALUE: usize = 60

The number of one unit of time in the other.

impl<const N: u128> Ord for Minute<N>

fn cmp(&self, other: &Minute<N>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<const N: u128> PartialEq<Day<N>> for Minute<N>

fn eq(&self, _: &Day<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Hour<N>> for Minute<N>

fn eq(&self, _: &Hour<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Microsecond<N>> for Minute<N>

fn eq(&self, _: &Microsecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Millisecond<N>> for Minute<N>

fn eq(&self, _: &Millisecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Day<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Hour<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Microsecond<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Millisecond<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Nanosecond<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Second<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Unit<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Week<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Minute<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Second<N>> for Minute<N>

fn eq(&self, _: &Second<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Minute<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Week<N>> for Minute<N>

fn eq(&self, _: &Week<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq for Minute<N>

fn eq(&self, other: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialOrd<Day<N>> for Minute<N>

fn partial_cmp(&self, _: &Day<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Hour<N>> for Minute<N>

fn partial_cmp(&self, _: &Hour<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Microsecond<N>> for Minute<N>

fn partial_cmp(&self, _: &Microsecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Millisecond<N>> for Minute<N>

fn partial_cmp(&self, _: &Millisecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Day<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Hour<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Microsecond<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Millisecond<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Second<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Unit<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Week<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Minute<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Second<N>> for Minute<N>

fn partial_cmp(&self, _: &Second<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Minute<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Week<N>> for Minute<N>

fn partial_cmp(&self, _: &Week<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd for Minute<N>

fn partial_cmp(&self, other: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> Copy for Minute<N>

impl<const N: u128> StructuralPartialEq for Minute<N>

impl<const N: u128> TrivialClone for Minute<N>