Enum Unit 

#[non_exhaustive]
pub enum Unit<const N: u128 = 1> {
    Nanosecond,
    Microsecond,
    Millisecond,
    Second,
    Minute,
    Hour,
    Day,
    Week,
}

A statically-known multiple of a given unit of time.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

Nanosecond

Microsecond

Millisecond

Second

Minute

Hour

Day

Week

Trait Implementations

impl<const N: u128> Clone for Unit<N>

fn clone(&self) -> Unit<N>

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<const N: u128> Debug for Unit<N>

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<const N: u128> Eq for Unit<N>

#[doc(hidden)]

fn assert_receiver_is_total_eq(&self)

impl<const N: u128> Hash for Unit<N>

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<const N: u128> Ord for Unit<N>

fn cmp(&self, other: &Unit<N>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<const N: u128> PartialEq<Day<N>> for Unit<N>

fn eq(&self, _: &Day<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Hour<N>> for Unit<N>

fn eq(&self, _: &Hour<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Microsecond<N>> for Unit<N>

fn eq(&self, _: &Microsecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Millisecond<N>> for Unit<N>

fn eq(&self, _: &Millisecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Unit<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Unit<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Second<N>> for Unit<N>

fn eq(&self, _: &Second<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Day<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Hour<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Microsecond<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Millisecond<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Minute<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Nanosecond<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Second<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Week<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Week<N>> for Unit<N>

fn eq(&self, _: &Week<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq for Unit<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialOrd<Day<N>> for Unit<N>

fn partial_cmp(&self, _: &Day<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Hour<N>> for Unit<N>

fn partial_cmp(&self, _: &Hour<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Microsecond<N>> for Unit<N>

fn partial_cmp(&self, _: &Microsecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Millisecond<N>> for Unit<N>

fn partial_cmp(&self, _: &Millisecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Minute<N>> for Unit<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Unit<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Second<N>> for Unit<N>

fn partial_cmp(&self, _: &Second<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Day<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Hour<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Microsecond<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Millisecond<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Minute<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Nanosecond<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Second<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Unit<N>> for Week<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd<Week<N>> for Unit<N>

fn partial_cmp(&self, _: &Week<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> PartialOrd for Unit<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

#[doc(hidden)]

fn __chaining_lt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

If self == other, returns ControlFlow::Continue(()). Otherwise, returns ControlFlow::Break(self < other).

#[doc(hidden)]

fn __chaining_le(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for <= instead of <.

#[doc(hidden)]

fn __chaining_gt(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for > instead of <.

#[doc(hidden)]

fn __chaining_ge(&self, other: &Rhs) -> ControlFlow<bool>

🔬This is a nightly-only experimental API. (partial_ord_chaining_methods)

Same as __chaining_lt, but for >= instead of <.

impl<const N: u128> Copy for Unit<N>

impl<const N: u128> StructuralPartialEq for Unit<N>

impl<const N: u128> TrivialClone for Unit<N>