Struct Nanosecond 

pub struct Nanosecond<const N: u128 = 1>;

A unit of time representing exactly N nanoseconds.

Implementations

impl Nanosecond

pub const fn per<T>(_larger: T) -> <T as DefaultOutput<Nanosecond>>::Output

where T: MultipleOf<Nanosecond, <T as DefaultOutput<Nanosecond>>::Output> + DefaultOutput<Nanosecond> + Copy,

Obtain the number of times Nanosecond can fit into T. If T is smaller than Nanosecond, the code will fail to compile. The return type is the smallest unsigned integer type that can represent the value.

Valid calls:

• Nanosecond::per(Nanosecond) (returns u8)
• Nanosecond::per(Microsecond) (returns u16)
• Nanosecond::per(Millisecond) (returns u32)
• Nanosecond::per(Second) (returns u32)
• Nanosecond::per(Minute) (returns u64)
• Nanosecond::per(Hour) (returns u64)
• Nanosecond::per(Day) (returns u64)
• Nanosecond::per(Week) (returns u64)

pub const fn per_t<Output>( larger: impl MultipleOf<Nanosecond, Output> + Copy, ) -> Output

Obtain the number of times Nanosecond can fit into T. If T is smaller than Nanosecond, the code will fail to compile. The return type is any primitive numeric type that can represent the value.

Valid calls:

• Nanosecond::per(Nanosecond) (returns u8, u16, u32, u64, u128, usize, i8, i16, i32, i64, i128, isize, f32, or f64)
• Nanosecond::per(Microsecond) (returns u16, u32, u64, u128, usize, i16, i32, i64, i128, isize, f32, or f64)
• Nanosecond::per(Millisecond) (returns u32, u64, u128, usize, i32, i64, i128, isize, f32, or f64)
• Nanosecond::per(Second) (returns u32, u64, u128, usize, i32, i64, i128, isize, f32, or f64)
• Nanosecond::per(Minute) (returns u64, u128, i64, i128, f32, or f64)
• Nanosecond::per(Hour) (returns u64, u128, i64, i128, f32, or f64)
• Nanosecond::per(Day) (returns u64, u128, i64, i128, f32, or f64)
• Nanosecond::per(Week) (returns u64, u128, i64, i128, f32, or f64)

Trait Implementations

impl<const N: u128> Clone for Nanosecond<N>

fn clone(&self) -> Nanosecond<N>

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<const N: u128> Debug for Nanosecond<N>

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<const N: u128> Hash for Nanosecond<N>

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<const N: u128> Ord for Nanosecond<N>

fn cmp(&self, other: &Nanosecond<N>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<const N: u128> PartialEq<Day<N>> for Nanosecond<N>

fn eq(&self, _: &Day<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Hour<N>> for Nanosecond<N>

fn eq(&self, _: &Hour<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Microsecond<N>> for Nanosecond<N>

fn eq(&self, _: &Microsecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Millisecond<N>> for Nanosecond<N>

fn eq(&self, _: &Millisecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Minute<N>> for Nanosecond<N>

fn eq(&self, _: &Minute<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Day<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Hour<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Microsecond<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Millisecond<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Minute<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Second<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Unit<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Nanosecond<N>> for Week<N>

fn eq(&self, _: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Second<N>> for Nanosecond<N>

fn eq(&self, _: &Second<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Unit<N>> for Nanosecond<N>

fn eq(&self, other: &Unit<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq<Week<N>> for Nanosecond<N>

fn eq(&self, _: &Week<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialEq for Nanosecond<N>

fn eq(&self, other: &Nanosecond<N>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<const N: u128> PartialOrd<Day<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Day<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Hour<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Hour<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Microsecond<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Microsecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Millisecond<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Millisecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Minute<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Minute<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Day<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Hour<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Microsecond<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Millisecond<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Minute<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Second<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Unit<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Nanosecond<N>> for Week<N>

fn partial_cmp(&self, _: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Second<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Second<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Unit<N>> for Nanosecond<N>

fn partial_cmp(&self, other: &Unit<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd<Week<N>> for Nanosecond<N>

fn partial_cmp(&self, _: &Week<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> PartialOrd for Nanosecond<N>

fn partial_cmp(&self, other: &Nanosecond<N>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const N: u128> Copy for Nanosecond<N>

impl<const N: u128> Eq for Nanosecond<N>

impl<const N: u128> StructuralPartialEq for Nanosecond<N>